SVS Tri-Band Wireless Audio Adaptor


Transmits a pristine LFE or full-range stereo audio signal up to 130-feet at 16-bit/48KHz with ultra-low latency.
Tri-Band technology auto-switches between three wireless bands for use in crowded wireless signal areas where single-band wireless transmitters are prone to interference.
Wirelessly connects subwoofers, powered speakers, and more.

Setup of the SoundPath Tri-Band Wireless Audio Adapter takes minutes.
Once installed, it auto-switches between the 2.4 GHz, 5.2 GHz, and 5.8 GHz wireless bands for uninterrupted audio signal transfer.
Impervious to interference from Bluetooth, Wi-Fi routers, wireless security systems, cameras, and other wireless devices.

  • Deters against against both in and out of band sources of interference, including: microwaves, wireless cameras, cordless phones, Bluetooth devices and more
  • Operates seamlessly alongside 802.11b/g/n Wi-Fi
  • Automatic receiver antenna diversity minimizes fading and multi-path effects
  • Seamless RF band/channel switching
  • RF Band – Tri-Band (auto switching) (2.4/5.2/5.8 GHz) – finds the best solution and connects
  • Three RF frequency ranges for each frequency band:
    • Band 1:  2400-2483.5MHz
    • Band 2:  5150-5250MHz
    • Band 3:  5725-5875MHz
  • 22 Mbps wireless air data rate
  • Sample Rate:  48kHz
  • THD+N:  -70dB (10Hz – 20kHz)
  • S/N:  +105dB (10Hz – 20kHz)
  • Cross-talk:  >75dB @1KHz
  • Frequency Response:  6Hz – 20 kHz +/- 0.5 dB
  • Audio Latency:  < 19ms
  • Transmission Range 130’ (line of sight)


  • Analog Input Level:  Maximum 2Vrms
  • Minimum Power:  5V @0.5A


  • Analog Output Level:  Maximum 1Vrms
  • Minimum Power Requirement:  4.75V @0.3A

Included In The Box

  • Wireless Transmitter
  • Wireless Receiver
  • Two AC Power Adapters
  • Two USB cables for AC power adapter
  • Two Mono RCA to Mono RCA cables
  • Two Velcro
  • Quickstart Guide
Additional Information
Weight 1.25 kg
Dimensions (DxWxH) 60 × 80 × 26 mm