ARCAM Solo Uno Streaming Amplifier


The Solo Uno brings total simplicity to the complex world of audio streaming by providing a compact, stylish and elegant streamer with a built-in amplifier.

Boasting the class-leading Arcam sound quality, the effortless system requires just two speakers, the Solo Uno and a mobile device using the native music app of choice via Apple AirPlay2, Roon Ready, UPnP or Google Chromecast.

In addition, the Solo Uno can be updated “over the air” automatically to provide enhanced future streaming features and years of listening enjoyment.

The Solo Uno has recently received a firmware update to deliver both stability and ease of use improvements as well as integration of the following music streaming services: Tidal Connect,
Spotify Connect, Amazon Music HD.
See bottom of “Description” for firmware update instructions.

  • Class leading super-efficient amplifier design
  • Stylish cast aluminium case
  • A simple system that only requires two speakers, the Solo Uno and an app
  • GoogleCast, AirPlay 2, Roon Ready, UPnP Streamer
  • Optimised for low noise and minimum distortion
  • High-end audio circuitry
  • Frequency Response:  10Hz – 20kHz
  • Signal-to-Noise Ratio (A-Weighted):  117dB
  • Output Power (1kHz, 1% THD, One channel driven) 4Ω:  50W
  • Output Power (1kHz, 1% THD, One channel driven) 8Ω:  25W
  • AUX Input Sensitivity:  2V
  • Subwoofer Output Level:  2.1V
  • Subwoofer Cross-over Frequency:  80Hz
  • Power Requirements:  100 – 240VAC, 50/60Hz
  • Dimensions (W x H x D):  140 x 52 x 213 mm (includes speaker terminals)
  • Weight:  1.5 kg

Supplies Accessories

  • Power Cord
  • Wi-Fi Antenna
  • User Manual and Registration Card

Firmware Update Instructions

Step 1: Go to the ARCAM website, locate your product and download the latest firmware update from the bottom of the product page. Unzip the file and save the file somewhere super easy to locate (your desktop is good).

Step 2: Download the Google Home app onto your mobile device and set up the ARCAM unit using it. It’s nice and easy, just follow your nose!

Step 3: Once setup onto your network, jump into the products ‘Device Settings’ within the Google Home app and scroll to the bottom, where you’ll find the IP address of your ARCAM unit.

Step 4: Enter the IP address into a web browser on a PC, then click on ‘Device Settings’. Then select ‘Reboot device to the update mode’.

When prompted, select the unzipped ‘image.swu’ file you downloaded to your desktop and head away for a cup of tea…

The update takes about 10 minutes.


Once the update is complete your ARCAM product will now be bang up to date!