Sonance Sonarray SR1 System with Amplifier
$6,825.00
A complete outdoor landscape system of eight Satellite speakers, Amplifier and one Subwoofer.
Perfectly even coverage and high quality sound in areas of 2500 sq.ft (232 sq.m) up to 5000 sq. ft (464 sq. m).
Satellite speakers are designed to hide within the landscape and a below-ground subwoofer with canopy hidden under foliage, all designed to handle extreme conditions.
Runs off a standard 2-channel power amplifier or stereo receiver.
Daisy-chain wiring configuration for simple installation with 14 gauge, 4 conductor wire.
This system has the flexibility for configuration of up to sixteen Satellite speakers and two Subwoofers on a single amplifier.
Brand:Sonance
Description
- Woofer: 1 ea – 8″ (203mm) dual voice coil, polyproylene cone & Santoprene™ surround
- Satellite: 8 ea – 3 1/2″ (98mm) anodized aluminum cone & Santoprene™ surround
- Frequency Response: 40Hz – 20kHz ±3dB
- Impedance: 8 ohms per channel nominal
- Dispersion: 60º dispersion with an optimum listening area 8′-20′ (2.4-6.1 meters) from the satellites
- Power Handling: 50 watts minimum; 150 watts system
- Sensitivity: 85dB and 89dB SPL, satellite and subwoofer respectively, 2.83V / 1 meter
- Enclosure Material: Satellites – Non-corrosive, high-heat ABS sealed enclosures; Woofer – High density Polyethylene (HDPE) non-corrosive sealed enclosure
- Crossover Frequency: 100Hz
- Satellite Dimensions: 6 1/2″ L x 4 1/8″ Dia. (165mm x 105mm)
- Included Accessories: Eight ground stakes, 24 silicone filled wire nuts
- Installation Best Practice: Placement Recommendations: Satellites- 6′-8′ (1.8-2.4 meters) apart along perimeter of listening area. Woofer- The center of the eight satellites. Listening Area: Up to 2000 square feet. Wire Recommendations: 18 gauge up to 100′ (33 meters) 4 conductor, stranded, direct burial 16 gauge up to 150′ (50 meters) 4 conductor, stranded, direct burial 14 gauge up to 250′ (80 meters) 4 conductor, stranded, direct burial 12 gauge up to 600′ (192 meters) 4 conductor, stranded, direct burial Specifications subject to change. Direct burial cable required (sold separately).
- Subwoofer Dimensions: 22″ L x 15″ Dia. x (559mm x 381mm)
- Amp Dimensions (with feet): 8 5/8″W x 2 1/8″H x 16 13/16″D (219mm x 54mm x 427mm)
- Amp Dimensions (rack mounted): 8 5/8″W x 1 3/4″H x 16 13/16″D (482mm x 44mm x 427mm)
- Amp Output Power (8 Ohm): 125 Watts RMS per channel (2 channels driven)
- Amp Output Power (4 Ohm): 200 Watts RMS per channel (2 channels driven)
