Thorens TD201 Turntable
$1,049.00
The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable.
It comes with a smooth running belt drive and a aluminium platter with rubber mat.
The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.
Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.
Brand:Thorens
Description
Turntable
- Drive System: Belt Drive
- Motor: DC Motor
- Speed: 33 1/3 RPM, 45 RPM
- Rotation Speed Variation: +/–2%
- Wow and Flutter: 0.2%
- Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF); 60dB or higher (unweighted, 20kHz LPF)
- Platter: Aluminum Die-cast
- Diameter of Platter: 12″, 300mm
Tonearm
- Type: Alumi tube, Static Balance, Straight
- Effective Arm Length: 8.8″, 223.6mm
- Stylus Pressure Range: 0 to 4g
- Supported Cartridge Weight: 3.5 to 6.0g
- Overhang: 18.6mm
- Anti-skating Adjustment: Supported
Cartridge
- Type: MM type (Audio-Technica AT3600)
- Stylus Construction: Bonded Diamond
- Frequency Response: 20Hz to 20kHz
- Channel Separation: >18dB
- Channel Balance: 2.5dB
- Vertical Tracking Angle: 20 degrees
- Supported Load Impedance: 47k ohms
- Output Voltage: 2.5mV (1kHz, 3.54cm/sec.)
- Stylus Pressure: 3.5g +/–0.5g
- Cartridge Weight: 5g +/–0.5g
- Head-shell Weight: 10g (including Screws, Nuts and Wires)
General
- Analog Output Connector: RCA Pin jack (Gold-plated)
- Power: AC 100 to 240V, 50/60Hz
- Power Consumption: 1.5W (less than 0.5W at Standby)
Additional Information
| Weight | 3.9 kg |
|---|---|
| Dimensions (DxWxH) | 121 × 420 × 355 mm |
| Colour | Black Gloss, White Gloss |
