10 Amp compact power conditioner with auto-resetting voltage protection. Export.
With Furman’s SMP (Series Multi-Stage Protection), damaging transient voltages are safely absorbed, clamped and dissipated – no sacrificed parts, no service calls, no down time.
While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furman’s SMP clamps at 376VAC peak, 275 VAC RMS even when tested with multiple 6000VAC – 3000 Amp surges!
This unprecedented level of protection is only available with Furman’s SMP technology.
Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions.
Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line!
Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground.
Furman’s SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.
Furman’s trusted overvoltage circuitry protects against all too frequent accidental connections to extreme voltage by shutting off the incoming power until the overvoltage condition is corrected.
AC Current Capacity
AC Noise Attenuation, Transverse (Differential) Mode
Transient Voltage Surge Suppression
|Dimensions (DxWxH)||216 × 127 × 44.45 mm|