ISO Acoustics Gaia-Titan Carpet Spikes
These carpet spikes are recommended to provide best results when the Gaia-Titan Isolators are used on thick carpet, or carpet with thick under pad. The carpet spikes are not required on thin carpet.
The carpet disks feature 0.6” (15 mm) long spikes which provide a strong connection through the carpet to provide a solid foundation for the Gaia-Titan Isolators.
Description
How To Install Gaia-Titan Carpet Spikes
Tilt the speaker or subwoofer to raise the Gaia-Titan Isolators above the ground, then position the carpet spikes underneath the Isolators and lower the side back down. Repeat the process on the other side by tilting the other side of the speaker and position the carpet spikes underneath the Isolators before lowering the speaker back down.
You might need to raise and lower each side of the speaker again until the carpet spikes are positioned level on the ground and are properly aligned underneath the Gaia-Titan Isolators.
The carpet spikes installation is the final step. The carpet spikes should not be installed until after the Gaia-Titan Isolators are installed and the speaker or subwoofer is in its final position.
- Construction Material: Machined stainless steel structure
- Package Includes: 4 Carpet disks
- Warranty: 2 years
- Gaia-Titan Cronos:
- Dimensions (W x H): 99 x 22 mm (3.9″ x 0.9″)
- Spike Length: 15 mm (0.6″)
- Gaia-Titan Rhea:
- Dimensions (W x H): 79 x 22 mm (3.1″ x 0.9″)
- Spike Length: 15 mm (0.6″)
- Gaia-Titan Theis:
- Dimensions (W x H): 69 x 22 mm (2.72″ x 0.9″)
- Spike Length: 15 mm (0.6″)
