Package Includes
1 x Pair ELAC Carina BS243.4 Bookshelf Speakers
- Type: 2-way Vented box
- Woofer: 1 x Aluminum cone 5-1/4″
- Tweeter: JET folded ribbon
- Crossover Frequency: 2.7kHz
- Frequency Range (IEC 268-5): 46Hz – 30kHz
- Sensitivity: 85dB/2.83V/1m
- Recommended Amplifier Power: 30 to 150 wpc
- Peak Power Handling: 100W
- Nominal | Minimum Impedance: 6 Ohm / 4.8 Ohm
- Finishes: Satin Black, Satin White
1 x Arcam SA30 Integrated Network Amplifier
- Class G amplification for impeccable sound and efficiency
- 5 analogue inputs including switchable MM/MC PHONO input
- 4 digital inputs
- 1 ARC input
- GoogleCast, AirPlay 2, uPnP Streamer
- Roon Ready using ARCAM Software V867
- MQA supported
- 3 Dirac EQ profiles (input assignable)
- Full I/P control including Control4 and Crestron
Continuous Power Output (0.5% THD), per channel
- Both Channels, 8Ω, 20Hz—20kHz: 120W
- Both Channels, 4Ω, at 1kHz: 200W
- Harmonic Distortion, 80% power, 8Ω at 1kHz: 0.002%
Analogue Inputs
- ADC: AK5552
- Sample Rate / Bit Depth: 192kHz / 32 bit
Phono (MM) Inputs
- Input Sensitivity at 1kHz (nominal): 5mV
- Input Impedance: 47kΩ + 200pF
- Signal/Noise Ratio (A-wtd): 80dB, ref. 5mVat 1kHz
- Overload Margin: 21dB ref. 5mV at 1kHz
- Frequency Response (ref. RIAA curve): 20Hz – 20kHz ± 1dB
Phono (MC) Inputs
- Input Sensitivity at 1kHz (nominal): 0.35mV
- Input Impedance: 470Ω + 1nF
- Signal/Noise Ratio (A-wtd): 80dB, ref. 0.35mV at 1kHz
- Overload Margin: 21dB ref. 0.35mV at 1kHz
- Frequency Response (ref. RIAA curve): 20Hz – 20kHz ± 1dB
Line Inputs
- Nominal Sensitivity: 1V
- Input Impedance: 10kΩ
- Maximum Input: 4.8Vrms
- Frequency Response: 20Hz – 20kHz ± 0.2dB
- Signal/Noise Ratio (A-wtd) 100W, ref. 2.1V input: 112dB analogue direct, 106dB ADC / DAC
Digital Inputs
- DAC: ESS9038K2M
- Frequency Response: 20Hz – 20kHz ± 0.1dB
- Total Harmonics Distortion + Noise: 0.0007%
- Signal/Noise Ratio (A-wtd) ref. 0dBFS/100W: 113dB
- Supported Sample Rates:
- Optical: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
- Coaxial: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- Bit Depth: 16-bit – 32-bit
Pre-amplifier Output
- Nominal/Maximum Output Level: 800mV / 1.25V
- Output Impedance: 240Ω
Headphone Output
- Maximum Output Level into 600Ω: 5Vrms
- Output Impedance: 1Ω
- Load Range: 16Ω – 2kΩ
General
- Mains voltage: 110–120V or 220–240V, 50/60Hz
- Maximum power consumption: 800W
- Low power standby consumption: 0.5W
- Network standby consumption: 2W
- Dimensions W x H x D: 433 x 100 x 323 mm (includes feet, control knob and speaker terminals)
- Weight: 10.7kg
Supplied Accessories
- Mains Leads
- Remote Control
- 2 x AAA Batteries
- User Manual
- 2 x WiFi Antenna
- Setup Microphone
- USB Cable
1 x Thorens TD402DD Turntable
- Stable and Super Silent Direct Drive
- Auto Start and Auto Stop
- Switchable Integrated Phono Pre Amp
- Carbon Tonearm
- Detachable Headshell
- Pre-installed Cartridge AT VM95 E
- An acrylic dust cover and a power supply are included
Turntable Section
- Drive System: Direct Drive
- Motor: DD Motor
- Speed: 33 1/3 RPM, 45 RPM
- Rotation Speed Variation: +/–0.33%
- Wow and Flutter: 0.15%
- Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF), 60dB or higher (unweighted, 20kHz LPF)
- Platter: Aluminum Die-cast
- Diameter of Platter: 12“, 300mm
Tonearm Section
- Type: Static Balance, Straight
- Effective Arm Length: 8.8“, 223.6mm
- Stylus Pressure Range: 0 to 4g
- Supported Cartridge Weight: 3.5 to 6.2g
- Overhang: 18.6mm
- Anti-skating Adjustment: Supported
Cartridge Section
- Type: MM type (Audio-Technica VM95E)
- Stylus Construction: Bonded elliptical Diamond
- Frequency Response: 20Hz to 22kHz
- Channel Separation: >20dB
- Channel Balance: 2.0dB
- Vertical Tracking Angle: 23 degrees
- Supported Load Impedance: 47k ohms
- Output Voltage: 4mV (1kHz, 5cm/sec.)
- Stylus Pressure: 2.0g +/–0.2g
- Cartridge Weight: 6.1g
- Head-shell Weight: 11g (including Screws, Nuts and Wires)
Analog Output
- Connector: RCA Pin jack (Gold-plated)
- Power: AC 100 to 240V, 50/60Hz
- Power Consumption: 2.5W