Package Includes:
1x Yamaha Aventage RX-A4A AV Receiver
- 7.2 Channel powerful surround sound with Zone2
- Wi-Fi, Bluetooth®, AirPlay 2, Spotify Connect and MusicCast multi-room audio
- Surround:AI automatically optimises the surround effect in real time
- Dolby Atmos® and DTS:X® with CINEMA DSP HD3
- YPAO™-R.S.C. with multi-point measurement and precision EQ
- HDMI™ 7 in/3 out, 8K/60Hz, 4K/120Hz
- Dedicated gaming function(ALLM,VRR,QMS,QFT) via FW update
- ESS SABRE ES9007S Premier Audio DAC for high performance conversion
- Voice control with Alexa and Google Assistant devices. *Availability varies by region
- Roon Tested: Yes
Amplifier
- Channel: 7.2
- Rated Output Power (1kHz, 1ch driven): 135 W (8 ohms, 0.9% THD)
- Rated Output Power (20Hz-20kHz, 2ch driven): 110 W (8 ohms, 0.06% THD)
- Maximum Effective Output Power (1kHz, 1ch driven): 165 W (8 ohms, 10% THD)
- High Slew Rate Amplifier: Yes
Surround Sound Processing
- Surround:AI: Yes
- CINEMA DSP: Yes (HD3)
- DSP Programs: 24
- Dialog Level Adjustment: Yes
- Virtual Presence Speaker: Yes
- Virtual Surround Back Speaker: Yes
- Dialogue Lift: Yes
- SILENT CINEMA / Virtual CINEMA DSP: Yes
- Dolby Atmos: Yes
- Dolby Atmos Height Virturalizer: Yes
- Dolby TrueHD: Yes
- Dolby Digital Plus: Yes
- Dolby Surround: Yes
- DTS:X: Yes
- DTS-HD Master Audio: Yes
- Auro 3D: N/A
Audio Features
- File Format: MP3 / WMA / MPEG-4 AAC, ALAC: up to 96 kHz / 24-bit, FLAC: up to 384 kHz / 24-bit, WAV / AIFF: up to 384 kHz / 32-bit, DSD: up to 11.2 MHz
- Pure Direct: Yes
- Compressed Music Enhancer: Yes
- High-resolution Music Enhancer: Yes
- YPAO Multi-point Measurement: Yes with R.S.C. (Reflected Sound Control) , 3D, 64-bit High Precision EQ Calculation
- YPAO Volume: Yes
- Adaptive DRC (Dynamic Range Control): Yes
- Initial Volume & Maximum Volume Setting: Yes
- A.R.T. Wedge: Yes
- Bi-amp Capability: Yes
- Audio Delay: Yes (0-500 ms)
- DA Converter: 384 kHz / 32-bit ESS Hyperstream DAC ES9007S
Video Features
- HDMI eARC: Yes
- HDMI Audio Return Channel: Yes
- HDMI Pass-through: 8K60AB, 4K120AB (via future update)
- HDMI Up-scaling: Yes, up to 8K (via firmware update)
- HDMI Up-conversion: N/A
- Dolby Vision: Yes
- HDR 10+: Yes (via firmware update)
- VRR/ALLM/QMS/QFT: Yes (via firmware update)
- Video Adjustment: N/A
Connectivity
- MusicCast Surround: Yes
- HDMI Input/Output: 7 / 3 (HDMI2.1 / HDCP2.3)
- HDMI CEC: Yes
- USB Input: Yes
- Network Port: Yes
- WiFi: Yes (2.4 / 5 GHz)
- AirPlay 2: Yes
- Bluetooth: Yes (SBC / AAC)
- Front AV Input: USB
- Digital Audio Input/Output Optical: 3 / 0
- Digital Audio Input/Output Coaxial: 2 / 0
- Analog Audio Input/Output: 6 / 0
- Phono Input: Yes
- XLR Terminal: N/A
- Component Video Input/Output: N/A
- Composite Video Input/Output: N/A
- Preout: 7.2-ch
- Headphone Output: 1
Tuner
- FM/AM Tuner: Yes (Availability varies by region.)
- DAB Tuner: Yes (Availability varies by region.)
User Interface
- On-screen Display: Graphical User Interface
- SCENE: SCENE PLUS (8 sets)
- App Control: Yes (iPhone / iPad / Android phone / tablet)
- Web Browser Control: Yes
- Remote Control Unit: Yes
Zone Control
- Zone 2 Audio Output: Preout / HDMI
- Zone 3 Audio Output: N/A
- Zone 4 Audio Output: N/A
- Powered Zone: Zone 2
- Zone Video Output: HDMI
- Zone B Output: N/A
- Zone GUI: N/A
- RS-232C Interface: N/A
- +12V Trigger Output: 2
- Remote (IR) Input/Output: 1 / 1
- Party Mode: Yes
General
- Standby Power Consumption (IR only): <0.4 W
- Auto Power Standby: Yes
- ECO Mode: Yes
- Dimensions (W x H x D): 435 x 191 x 442 mm
- Dimensions (W x H x D): 435 x 270 x 442 mm (with antenna up)
- Weight: 16.2 kg
- Finish: Black
Note
If you are running a 4K/120 or 8K/60 capable device with correctly spec’d HDMI cabling and a display that supports the 4K/120+8K/60 formats, you will need to make a change in the AVR settings in order to pass the signal through.
Simply navigate through the AVR menu and select ‘Video/HDMI’.
Then choose ‘HDMI Video Format’.
For the HDMI port(s) that the applicable sources are connected to, ensure the video format is changed to ‘8K Mode’.
1x Pair SVS Tower Speakers
Speaker
- Floor Standing Tower Loudspeaker
- Single set of 5-way binding posts
- Dual 1.7” wide-flared rear-firing ports
- Cloth grille with pin/cup retention system
- Elastomer stick-on bumper feet (adds 3mm to height)
- Spiked metal screw-in feet included – adjustable for level
- Cabinet Dimensions (H x W x D): 914 x 203 x 282 mm
- Overall Dimensions (H x W x D): 929 x 203 x 295 mm (includes grille and feet)
- Weight: 18.19 kg
- Rated bandwidth: 30 Hz-25 kHz (±3 dB)
- Nominal impedance: 8 ohms
- Sensitivity: 87 dB (2.83V @ 1 meter full-space, 300-3kHz)
- Recommended amplifier power: 20-250 watts
Driver
1″ Aluminum Dome Tweeter:
- FEA-optimized diffuser for airy and unveiled presentation
- Aluminum dome for exceptional transient response
4.5″ Midrange Driver:
- Polypropylene cone for excellent stiffness/mass ratio and pistonic behavior
- Aluminum shorting ring to reduce gap inductance, lower distortion, and enhance high frequency response
- Cast ABS-fiberglass composite basket ensures precision component alignment and excellent thermal transfer
- Vented voice coil former minimizes air compression artifacts
Dual 6.5″ Woofers:
- Long stroke motor and suspension for high output
- Polypropylene cone for excellent stiffness/mass ratio and pistonic behavior
- Aluminum shorting ring to reduce gap inductance, lower distortion, and enhance high frequency response
- Cast ABS-fiberglass composite basket ensures precision component alignment and excellent thermal transfer
- Vented voice coil former minimizes air compression artifacts
Crossover
- 3.5-way crossover with premium-grade capacitors, air-core inductors and heavy-trace printed circuit boards
- Tapered woofer array optimizes the transition to the midrange driver and reduces vertical axis lobing
- Midrange-to-tweeter crossover: 2.1 kHz (12 dB/octave slopes)
- Top woofer (Combined Woofer) to midrange crossover frequency: 350 Hz (12 dB/octave slopes)
- Bottom woofer low pass frequency: 165 Hz (customized filter Q and slope)
Cabinet
- Separate sealed midrange enclosure shifts standing waves beyond the driver pass band, improving sound quality
- Separate woofer enclosures with optimized port tuning frequencies for smooth and accurate bass response
- Acoustically transparent and FEA optimized grilles minimize diffraction
- Chamfered front baffle and flush-mounted drivers reduce edge diffraction and improved on-axis high frequency response
- FEA-optimized cabinet and bracing eliminates resonances
- Finish: Black Ash
1x SVS Prime Center Speaker
Speaker
- Single set of 5-way binding posts
- Dual 1” wide-flared rear-firing ports
- Cloth grille with pin/cup retention system
- Elastomer stick-on bumper feet (adds 3mm to height)
- Center Channel Loudspeaker
- Cabinet Dimensions (H x W x D): 193 x 472 x 218 mm
- Overall Dimensions (H x W x D): 196 x 472 x 234 mm (includes grille and bumper feet)
- Weight: 9.17 kg
- Rated bandwidth: 48 Hz-25 kHz (±3 dB)
- Nominal impedance: 8 ohms
- Sensitivity: 86 dB (2.83V @ 1 meter full-space, 300-3kHz)
- Recommended amplifier power: 20-200 watts
Driver
1″ Aluminum Dome Tweeter:
- FEA-optimized diffuser for airy and unveiled presentation
- Aluminum dome for exceptional transient response
3.5″ Midrange Driver:
- Polypropylene cone for excellent stiffness/mass ratio and pistonic behavior
- Cast ABS-fiberglass composite basket ensures precision component alignment and excellent thermal transfer
- Vented voice coil former minimizes air compression artifacts
Dual 5.25″ Woofers:
- Long stroke motor and suspension for high output
- Polypropylene cone for excellent stiffness/mass ratio and pistonic behavior
- Aluminum shorting ring to reduce gap inductance, lower distortion, and enhance high frequency response
- Cast ABS-fiberglass composite basket ensures precision component alignment and excellent thermal transfer
- Vented voice coil former minimizes air compression artifacts
Crossover
- 3-way crossover with premium-grade capacitors, air-core inductors and heavy-trace printed circuit boards
- Midrange-to-tweeter crossover: 2.4 kHz (12 dB/octave slopes)
- Woofer-to-midrange crossover: 350 Hz (12 dB/octave slopes)
Cabinet
- Separate sealed midrange enclosure shifts standing waves beyond the driver pass band, improving sound quality
- Separate sealed midrange enclosure shifts standing waves beyond the driver pass band, improving sound quality
- Chamfered front baffle and flush-mounted drivers reduce edge diffraction and improved on-axis high frequency response
- FEA-optimized cabinet and bracing eliminates resonances
- Finish: Black Ash
1x Pair SVS Prime Elevation Speakers
Speaker
- Single set of 5-way binding posts
- 1” wide-flared rear-firing port
- Cloth grille with pin/cup retention system
- Magnetic SVS Logo which can be removed and oriented according to speaker application
- Elastomer stick-on bumper feet (adds 3mm to height)
- Unique SVS Multi-Angle Wall Bracket (patent pending) system that allows speaker to be wall mounted in any of four positions
- 1/4″ brass insert for use with included SVS Multi-Angle Wall Bracket and other bracket mounting systems
- Cabinet Dimensions (H x W x D): 235 x 138 x 200 mm
- Overall Dimensions (H x W x D): 238.7 x 138 x 211.5 mm (includes grille, binding posts and bumper feet)
- Overall Dimensions (H x W x D): 235 x 138 x 228 mm (includes grille and SVS Multi-Angle Wall Bracket)
- Weight: 3.5 kg
- Rated bandwidth: 55 Hz-25 kHz (±3 dB)
- Nominal impedance: 8 ohms
- Sensitivity: 87 dB (2.83V @ 1 meter full-space, 300-3kHz)
- Recommended amplifier power: 20-150 watts
Driver
1″ Aluminum Dome Tweeter:
- FEA-optimized diffuser for airy and unveiled presentation
- Aluminum dome for exceptional transient response
4.5″ Midrange Driver:
- Polypropylene cone for excellent stiffness/mass ratio and pistonic behavior
- Aluminum shorting ring to reduce gap inductance, lower distortion, and enhance high frequency response
- Cast ABS-fiberglass composite basket ensures precision component alignment and excellent thermal transfer
- Vented voice coil former minimizes air compression artifacts
Crossover
- 2-way crossover with premium-grade capacitors, air-core inductors and heavy-trace printed circuit boards
- Crossover network delivers outstanding phase coherency and time domain behavior
- Tweeter-to-woofer crossover: 2.5 kHz (12 dB/octave slopes)
Cabinet
- Acoustically transparent and FEA optimized grilles minimize diffraction
- Chamfered front baffle and flush-mounted drivers reduce edge diffraction and improved off-axis high frequency response
- FEA-optimized cabinet and extra thick MDF bracing eliminate resonances
- Angled baffle and optimized crossover combine for perfect acoustic performance at any position
- Finish: Black Ash
1x SVS PB-2000 Subwoofer
Subwoofer
- Finish: Premium Black Ash
- Protective non-resonant steel mesh grille
- Front-firing 12″ driver
- Rear-mounted amplifier
- Screw-in rubber feet
- Robust Medium Density Fiberboard(MDF) cabinet construction
- Cabinet Dimensions (H x W x D): 530 x 439 x 589 mm (without grille)
- Overall Dimensions (H x W x D): 530 x 439 x 645 mm (with grille)
- Weight (unboxed): 29.7 kg
- Shipped Dimensions (H x W x D): 762 x 584 x 685 mm
- Shipped Weight: 37.19 kg
Driver
- SVS 12” 2000-series driver
- Powder-coated cast aluminum basket
- Dual high-grade ferrite magnets
- Finite Element Analysis (FEA)-optimized motor structure
- Dual shorting rings reduce gap induction and lower distortion
- Extended pole piece improves heat sink and thermal management properties
- 2” diameter, high-power voice coil
- Upgraded Nomex spider for improved linearity and driver control at extreme drive levels
- High-quality insulated tinsel leads with 3-point-contact precision alignment
- Lightweight aluminum cone with polypropylene dust cap provides excellent rigidity and pistonic behavior
- Low-creep rubber long-throw surround for excellent durability and longevity
Amplifier
- Sledge STA-500D DSP amplifier
- 500 watts RMS continuous (1100 watts peak dynamic)
- Efficient and cool-running Class D topology
- DSP control for accurate response and refined behavior under all operating conditions
- Main power rocker switch
- Auto-On / On toggle switch
- 3-12V trigger with 1/8” (3.5 mm) TRS mini-jack input
- Green standby mode with < 0.5 watts consumption
- Stereo line-level RCA Input & Output connections
- Input impedance – 47 kΩ (unbalanced line-level RCA)
- Continuously variable volume/gain control
- Continuously variable (0-180 degrees) phase control
- Continuously variable (50-160 Hz) 12 dB/octave low pass filter frequency with disable/LFE setting
- Fixed 80 Hz 12 dB/octave high pass filter on line level outputs
- RoHS compliant, lead-free construction and world-wide safety certifications
- Detachable power cord