Thorens TD402DD (Direct Drive) Turntable
$1,999.00
The Thorens TD402DD comes ready to use.
Only the platter has to be placed on the axis, the tone arm balanced and tracking force and anti skating adjusted.
Putting in a belt is not necessary since there is none. And later while playing the end of the record is reliably detected and the drive stops.
Far from simple entry level standard Thorens TD402DD uses state of the art technology together with ease of use and perfect sound.
The Thorens TD402DD comes as best buy in its price range.
Brand:Thorens
Description
- Stable and Super Silent Direct Drive
- Auto Start and Auto Stop
- Switchable Integrated Phono Pre Amp
- Carbon Tonearm
- Detachable Headshell
- Pre-installed Cartridge AT VM95 E
- An acrylic dust cover and a power supply are included
Turntable Section
- Drive System: Direct Drive
- Motor: DD Motor
- Speed: 33 1/3 RPM, 45 RPM
- Rotation Speed Variation: +/–0.33%
- Wow and Flutter: 0.15%
- Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF), 60dB or higher (unweighted, 20kHz LPF)
- Platter: Aluminum Die-cast
- Diameter of Platter: 12“, 300mm
Tonearm Section
- Type: Static Balance, Straight
- Effective Arm Length: 8.8“, 223.6mm
- Stylus Pressure Range: 0 to 4g
- Supported Cartridge Weight: 3.5 to 6.2g
- Overhang: 18.6mm
- Anti-skating Adjustment: Supported
Cartridge Section
- Type: MM type (Audio-Technica VM95E)
- Stylus Construction: Bonded elliptical Diamond
- Frequency Response: 20Hz to 22kHz
- Channel Separation: >20dB
- Channel Balance: 2.0dB
- Vertical Tracking Angle: 23 degrees
- Supported Load Impedance: 47k ohms
- Output Voltage: 4mV (1kHz, 5cm/sec.)
- Stylus Pressure: 2.0g +/–0.2g
- Cartridge Weight: 6.1g
- Head-shell Weight: 11g (including Screws, Nuts and Wires)
Analog Output
- Connector: RCA Pin jack (Gold-plated)
- Power: AC 100 to 240V, 50/60Hz
- Power Consumption: 2.5W
Additional Information
| Weight | 6.1 kg |
|---|---|
| Dimensions (DxWxH) | 355 × 420 × 139 mm |
| Colour | Piano Black, Walnut Veneer High Gloss |
